Floor Lamp Wires – Where to Hide the Wires and How to Decorate Them?

Every time I cleaned my room, I hated what all the cables from the floor lamps, the computer, the TV, etc. looked like. So I decided to find out how to change it!

So how can you hide your wires from the floor lamps? Decorate your cables! Some people wrap their cables with strings, ribbons or thread corals. The cable changes from an unpleasant necessity into interior decoration. This is ideal for wires from standing lamps, which are often moved around.

If you are interested in checking out the best wire hider, you can find them by clicking here

How can I Hide my Floor Lamps Wires?

Cables from floor lamps, computers, TV, and a few other wires. It’s all tangled and dusted together. It looks unaesthetic, irritating, and disturbing.

Do you think this is how it’s gonna have to be? Nothing could be further from the truth!

Under my desk, there was a big, terrible bunch of cables. I always knew it was so ugly that it made the whole room look bad, but I thought it had to be.

It’s natural that where there’s electricity, there are cables. It’s natural that they don’t look pretty, you have to accept it.

And yet, in the interiors of colorful magazines, there is never such a problem. So, where did they go?

All You Need is a Box

The prettier, the better, but you have to choose one that will fit the extension cable and cables. It can’t be too small.

You need to check if there are any holes in it through which you can pass the cables.

There were two handy holes cut out of my box. I disconnected all the devices from the extension cord. Then I pulled out the plug from the strip and put it in the box.

It fits a little bit diagonally, but it’s a pretty big box, so it shouldn’t be a problem.

Now it’s time to clean up the cables.

I untied them, which wasn’t easy. I braided the cables from the floor lamp, monitor, computer, and speakers, so instead of three wires, I had one left.

I threaded the plugs through the cut-out hole of the box and plugged them in.

So simple. It took me 10 minutes. That’s it! A little change and I feel like Hercules, who just cut the Gordian knot!

Not everywhere, however, you can put boxes together. One of the simplest ways to hide cables is to cover them with a special strip, mounted just next to the floor or ceiling.

Cable Masking

Cable masking is often almost a must. This is because loose wires can cause a lot of problems, hanging on walls or getting tangled up behind furniture.

Although electricity surrounds us, and without it, it is hard to imagine everyday life today, tangled wires still remain a major drawback.

Masking cables help to deal with the unsightly cobweb and take care of safety. This is especially important when children are living at home.

Safety First and Foremost.

Which is the best way to lead the wires and how to mask the cables?

Does the electrical installation have to be hidden in the wall?

What can ideas for decorative cable routing be used in the home?

Depending on the scope of work we want to do, cable masking can be a challenge.

Not every electric cable allows you to change the arrangement.

If you do not have experience with working with electricity, it is better to outsource the task to a professional.

The priority for any project involving changes in installations is the protection of health and life.

After all, unsecured, obsolete, damaged, or burnt equipment can lead to life-threatening accidents and even fires.

It is, therefore, necessary to properly identify faulty electricity, locate the problem, and draw up a recovery plan.

Interference in electrical installations is a complex process that should only be carried out with the help of an experienced electrician.

Each room in the apartment requires a different number of electrical outlets, located at different heights, and meeting different safety standards.

While in the bathroom, where there is humid air, there are concealed sockets, in the bedroom or living room, there is no need to have it.

How to Mask Cables?

Already at the stage of finishing the apartment or planning a small renovation, you can use a few tricks that will reduce the number of electric wires visible in the interior.

The only downside is that at this very moment, you should have a specific plan of their arrangement in the apartment with precisely indicated sockets and light switches.

It’s so troublesome that a lot depends on the furniture, lamps, or audio/video equipment settings.

How to Hide Light Fixture Cords

Cables Hidden Under the Floor or in Skirting Boards

In addition to the classic masking of electrical wiring in walls, i.e., in specially forged ducts, electric cables can be hidden in places where they will not be visible at all, e.g., underfloor panels or skirting boards.

Note, however, that in the event of a failure, access to the cables will be severely limited.

Under the floor panels or skirting boards, you can place electrical cables from intelligent systems used in the home, such as lighting automation or home theater.

Tables and Other Creative Solutions

If you miss the right moment to mask problematic underfloor wiring, you can always buy or make practical containers or even furniture yourself that will allow you to better organize the installation in your home.

The solutions available on the market tempt with a modern design that deceives the eye and hides their real purpose.

An interesting idea may be, for example, tables or poufs hiding inside an extension cord for all plugs for devices stored in the room.

You can place such an addition on the floor lamp and cover it with flowers or other decoration – it’s a recipe for perfect masking of cables!

The downside of a puff or table is that it will not always fit in with your interior design.

Instead of buying such a container, you can make your own wooden box with round holes on the back wall, through which you can put the cables.

Inside there is room for an extension cord, plugs, and long cables. You can also decorate this box and place it next to your floor lamp.

Flexible Spirals and Tunnels

Boxes and other accessories have two main drawbacks – they require additional space and cover only those wires that are in contact with the floor.

So they are still not able to mask cables hanging from a desk.

If you are looking for minimalist solutions, you can reach for flexible spirals or plastic tunnels glued to the wall.

Such practical gadgets can be easily found in every construction shop.

This way of placing electric cables from the equipment makes it possible to pull out the cord or add a new one freely.

Although the cables will still be visible, it will be much easier to find one’s way in their maze.

If you respect the idea of zero waste and want to reduce the amount of plastic in your home, you can buy material instead of plastic covers – closed with Velcro or zipper.

Although they are more ecological, they are a bit more challenging to keep clean and remove dust and stains from everyday use.

Masking of Cables in the Cabinet or Behind the Wall

Not everyone will be satisfied with placing electric cables in gutters or special slats on the wall.

If the cable strip is too conspicuous and disfigures the interior, you can try to create a special cabinet.

A tiled shelf closed with a door in the color of the furniture can be an ideal solution to hide cables and power supplies.

If your TV is not on a TV set, a handmade box will be an interesting alternative for you. You can also attach a shelf for decoders and remote controls just above it.

The second possibility is to place a wall of plasterboard on which a TV set will be hung, and at the same time, all the cables will be placed inside it.

However, this carries a certain risk. If you need to disconnect or connect a new electrical cable, it will be challenging to get inside without destroying a part of the wall.

Emphasize, Instead of Masking!

Cables for Decoration

It should be remembered that the way of conducting the electrical installation does not depend only on our vision, but above all on the conditions in the room found by the electrician.

In general, in dry and heated interiors with walls, ceilings, or ceilings covered with plaster, the installation can be carried out directly under the plaster layer.

In fact, it is one of the modern standards in interior design.

However, there are times when electrical cables have to be routed to the top of a wall – for example, in humid and unheated rooms.

It is worth to think about cable routing to the top when the installation of electrical installation from scratch in a room is associated with the forging of walls and plasters.

Then the equipment in the room with electricity will be cheaper and simpler.

If we decide to do so, we must take into account security issues. Pay particular attention that electrical cables do not provoke children or pets to play.

The cables are fixed to the wall with special cable ties. It is crucial that they are fastened rigidly and do not move.

Raw-style Decorative Cables

Masking of cables will not be necessary if we dream of an industrial style of interior, which loves to pull out all the elements of home installations.

Visible cables – preferably in the vicinity of exposed brick, raw concrete, or unfinished plaster – will give the interior a lofty character, making it look like a factory or a workshop.

This concept will be complemented by original details such as custom retro style switches, uncovered decorative light bulbs, industrial lamps, or metal chandeliers.

Decorative Shapes

Raw functionality in industrial style is one of the possibilities of using external cables. In this field, we are limited only by our imagination.

Cables can be used as a material for unusual wall installations.

By fulfilling a function similar to graphics, paintings, posters, or wall stickers, ordinary wires will become an original, eye-catching decoration.

A little bit of artistic talent is enough to draw an interesting pattern on the wall and lead an electric cable through it.

Wall Stickers

Stickers are an easy way to hide cables and decorate the wall at the same time.

Special wall stickers are covered with quite strong glue. They can easily hide hanging wires, e.g., those from floor lamps.

In the case of plasterboard walls, we can cut a small hole in the wall, through which we can feed the cables to the socket.

Some furniture has built-in cable ducts and pockets to hide cables. It is worth to use this solution, especially in the case of a desk, around which cords are usually collected.

Ordinary rings for documents will help us with cleaning.

They will work well as holders for plugs you want to have within your reach or to hold cables if you’re going to lead wires behind the furniture.

Decorate Your Cables

Some people wrap cords around cables with string, ribbons, or thread corals on them.

The cable then turns from an unpleasant necessity into interior decoration.

This is a perfect solution for cables from standing lamps, which are often repositioned.

It would be impractical to fix the lamp wires in the wall.

It is best to adjust the type of application on the cable to the appearance of the lamp, for example, wrap a ribbon in the color of the lampshade.

Check Out Other Helpful Articles

Recent Posts